LOW SPEED PRE-IGNITION (LSPI) – THE ENGINE KNOCK RETURNS

LSPI engine knock

How to prevent LSPI? Use the right motor oil!

Right engine oil against engine knock

Right engine oil against engine knock

THE ENGINE KNOCK RETURNS. What exactly is LSPI? How does LSPI occur? How to prevent LSPI?

BERLIN, 14163, GERMANY, January 31, 2021 /EINPresswire.com/ — Older drivers, as well as those involved in motorsports, are well familiar with the phenomenon of engine knocking. However, due to continuous improvements in engine design and on-board control equipment, the risk of knock has been effectively eliminated; therefore many may have never heard of it. Unfortunately, old lessons seem to have been forgotten and the quest for fuel economy has spurred the engine downsizing and boosting craze. As a result, the engine knock has returned with a new scientific name: LSPI or Low-Speed Pre-ignition.

What exactly is LSPI?

Low-Speed Pre-ignition is an unplanned and unpredictable premature combustion of the fuel-air mixture in the combustion chamber, which occurs especially at low speeds, high load, and at the beginning of acceleration. The characteristic noise of LSPI is a strong and loud knocking sound, similar to the engine knock, only much stronger. It occurs stochastically and is difficult to reproduce. LSPI is not good for the engine and the outcome can be completely devastating: cracked pistons and spark plugs, damaged rings and ring lands, buckled connecting rods, failed rod bearings – just to name a few.

How does LSPI occur?

In a spark-ignited internal combustion engine, the fuel-air mixture must ignite at a precise moment in the 4-stroke cycle in order for the engine to operate properly. The combustion is started by a spark plug. This ignition advance can be controlled and allows time for the combustion process to develop peak pressure at the right moment for achieving maximum engine efficiency. The knock occurs when the mixture ignites when it shouldn´t or when it stochastically explodes instead of burning normally. A drastic spike in cylinder pressure during the knock creates a characteristic detonation sound.
How to prevent LSPI? Use the right motor oil!

In recent years scientists have done a lot of progress in monitoring and understanding the LSPI phenomenon. Today it can be said that there are many factors causing LSPI. In addition to engine design, high pressure in the cylinder with increased engine power, low-quality gasoline, and lean air-fuel mixtures, as well as poor-quality motor oils have influence on causing LSPI. Therefore, oil manufacturers monitor current advances in understanding LSPI and timely adapt best practices in their product formulations which explicitly state that they help prevent LSPI. Choosing the right engine oil is therefore the key. But, what kind? An oil which offers the highest engine cleanliness – not only that – which ideally protects against wear granting an exceptionally strong lubrication film and ensures excellent fuel savings – only then it has the capacity to withstand LSPI. For instance, BIZOL Green Oil+ is one of the first LSPI-proof products on the market. The innovative additive technology of Green Oil + products has noticeably proven to reduce the risk of LSPI.

About BIZOL
BIZOL is a German lubricant company manufacturing innovative and effective engine oils and aftermarket car care products. BIZOL was founded in 1998 and is currently operating in more than 65 countries. BIZOL is an example of a company using an effective business model serving partners with 100% support from its headquarters in Berlin, Germany.

BIZOL Germany GmbH
BIZOL
email us here
Visit us on social media:
Facebook
Twitter
LinkedIn

Right engine oil to prevent engine knock LSPI


Source: EIN Presswire

WAYKEN Rapid’s Automotive Lighting Prototypes Display the Best Optical Details

CNC machining

CNC machining

aluminum reflector

aluminum reflector

optical clear parts

optical clear parts

WayKen’s engineering teams specialize in a variety of automotive prototyping developments and rapid manufacturing technology that can match customer's needs.

As one of the best auto prototype lighting prototype experts in China, our core objective is to well serve each customer and provide the best solutions for them. 100% Responsibility! 100% Quality!”

— Founder Raymond

SHENZHEN, GUANGDONG, CHINA, January 31, 2021 /EINPresswire.com/ — WayKen is a prototype expert of automotive lighting with outstanding success and confidence that stem from the team’s hard work and strength. The company provides complete automotive lighting prototypes, increasing their knowledge and experience in this field. Several well-known automotive OEMs and suppliers worldwide avail themselves of varying professional prototype lighting services. WayKen provides auto lighting assembly, ranging from proof-of-concept design reviews and optical system development engineering tests to show car projects. Also, the top specialized manufacturer covers other client’s demands, from lamp lens prototyping to optical prototyping. There is support for all levels of automotive product development processes. Another area WayKen caters to is over-molding plastic parts. Over there, engineering teams specialize in a variety of automotive prototyping developments and rapid manufacturing technology. Services include 3D printing, CNC machining, vacuum casting, low-volume injection molding, rapid aluminum tooling, and sheet metal processing.

Auto Lamp Lens Prototype
It is worth noting that WayKen’s expertise spans comprehensive CNC machining, effective split and bond solutions, and highly skilled hand-polishing. Hence, the manufacturer has no problem handling headlight prototype and prototype tail lights productions.
• Comprehensive CNC Machining. WayKen combines 3-, 4-, 5-axis CNC milling machines, equipped with machine tools, having a stroke of more than 1 meter. As such, it is easy to machine clear plastic parts without blemishes. Explore more prototype lamp lens projects

• Effective Split and Bond Solutions. Split and bond solutions can respond to machining costs saving and machining limitations. The visible bonding line on the acrylic surface can be invisible by applying a suitable splitting solution and fine finish.

• Highly Skilled Hand-Polishing. To ensure the delicate transparency for auto lenses, WayKen strictly processes polish from coarse to fine sand-polish and from polish paste to polish liquid, to achieve the highest transparency on the Lens.

• Prototype Achieves 2K Molding. Additionally, WayKen can provide a variety of optional cost-effective 2K molding solutions. Urethane Casting achieves the integrated 2K lens over-molding in two or more materials.

WayKen Creating a Balance Between Optics and Aesthetics
In implementing precision machining of optical components, WayKen uses 5-axis CNC machining for the complex surface features. Diamond cutting tools are available to achieve top surface quality. It is worth noting that the minimum tool can machine to R0.1mm to perfectly present the designer’s optical details. This methodology does not only address aesthetics but also helps the optical designer to verify the luminosity.

Using Mirror-Milling on Complex Surfaces and Optical details for the Best Result

One of WayKen’s focal points is the CNC aluminum reflector. Improved reflectivity, enhanced illumination intensity, and light range are critical for vehicle light reflectors (reflector cups). As such, the manufacturer Utilizes precision 5-axis CNC machining equipment and high-speed cutting techniques for machining complex geometry aluminum reflectors. In the same vein, it is a priority to focus on every engineering detail and design specification to help designers with every challenging project. Here are the areas WayKen thrive at that makes them successful in automotive lighting prototype manufacturing.

• CNC manufacturing team of professional engineers and machinists can optimize NC programming and efficient tool paths.
• Availability and application of 5-axis continuous CNC machining for greater machining accuracy and flexibility.
• WayKen pays attention to every design detail. Optical pattern details are machined to a minimum radius of R0.10mm.
• The company provides excellent surface quality with a finished surface finish of Ra (μm) 0.2 and a surface tolerance of ±0.025mm.
• Auxiliary EDM machining is necessary to meet the overall machining requirements of the part.
• With highly professional hand polishing, the final reflector sample surface will have an optical mirror effect. Explore more prototype light guide project here.

WayKen takes into consideration customers’ needs at each stage, ranging from small-batch customization to pre-production. The company occupies the top spot in the following areas:
• Small Batch Urethane Casting. WayKen Rapid Manufacturing uses low volume vacuum casting parts for optical prototyping. Such components play pivotal roles in loading and unloading tests to check working mechanisms and manufacturability. Hence, it is easy for customers to get production-like results within two weeks (in most cases), including mechanical characteristics, color, and surface finish. But that is not all there is to such this service. WayKen achieves this using accurate and detailed prototypes, fast and inexpensive silicone molds, and a vast range of engineering-grade polyurethane materials.

• Rapid Tooling. Another aspect worth noting is that WayKen’s expertise and commitment help to provide rapid tooling of both aluminum, soft steel, and low volume injection molding to deliver customers’ end-use molded parts within 2-5 weeks. The manufacturer provides cost-effective and rationalized advice from designs, materials, production processes, manufacturability, and many more.

About WayKen Rapid Manufacturing Industry
WayKen Rapid manufacturing industry is currently active in over 30 countries with over 200 customers worldwide. Their professional team is based in China and boasts of more than 60 employees and over 5000 projects. For more info, kindly visit https://autoprotoway.com/ or https://www.waykenrm.com/.

Candy Chen
Company
075523731920
candy@waykenrm.com
Visit us on social media:
Facebook
Twitter
LinkedIn

Custom Prototyping and Manufacturing Services


Source: EIN Presswire

Syndicate Learning Group Launches Most Advanced AI Driven Learning Management System

AI Based LMS

AI Based LMS

Syndicate LMS

Syndicate LMS

Syndicate Learning

Syndicate Learning

The AI Driven Learning Management System which is capable to replace the legacy LMS. It use Ai for content curation, learning distribution and personalization.

DELHI, INDIA, January 30, 2021 /EINPresswire.com/ — Syndicate Learning announced that it has launched one of the most advanced Artificial Intelligence driven Learning Management System that has capability to replace most Legacy LMS by bringing in technology features that shall stay for years to come. Syndicate Learning is a group consisting of various companies that deliver trainings, develop eLearning courses & implement Learning Management Systems

The system has been in development for the last four years with the help of a diverse team of seasoned L&D professionals, data scientists, software engineers and business analysts with a deep passion for solving the new-age learner’s problem.

The four key features of the system are:

1. AI Based Content Curation: The System can spider the internet and curate content based on organization and users’ needs and reduce the need to create niche content by 60%.
2. Automated Personalized Learning: Delivery of content and courses personalized to every learner based on their competencies, behaviors and learning needs. No need to assign courses manually.
3. Learning Index: This LMS creates a proprietary algorithm to measure a user’s learning journey comprehensively across three planes: knowledge, skills and competency.
4. Complete Learning Solution: As an end to end platform this LMS caters to all corporate learning scenarios – Self paced learning, Virtual ILT, Digital Learning, Classroom based learning.

Sonika Rao, Principal Consultant and official spokesperson of Syndicate Learning said, “The AI Based LMS is based on the scientific principles of Artificial Intelligence & Data Science. Our content curation engine has so far reduced the need of content creation by 60% and thus saving millions of our customers that would otherwise be invested in creating custom content. It has reduced several thousand man hours that would otherwise be spent in mundane tasks like data entry. Syndicate Learning Group’s LMS is set to create a landmark in the history of LMS.”

Syndicate LMS has publicly announced this development after implementing in 10+ organizations and going through the test of time.

To know more about the LMS and view a Demo please write to contact@syndicatelearning.com.

Sonika Rao
Syndicate Learning
+91 8800880520
contact@syndicatelearning.com
Visit us on social media:
Facebook
Twitter
LinkedIn


Source: EIN Presswire

Minority-Owned Performance Auto Repair Shop, The Driveway, in San Jose Launches Streetwear Brand

streetwear, melanie wardhana, the driveway, drvwy

Melanie Wardhana wearing DRVWY Essentials

The Driveway, performance, automotive, repair shop, drvwy

The Driveway Performance Auto Shop

Olivia Wong Miss Asian Global DRVWY The Driveway Streetwear apparel

Olivia Wong Miss Asian Global wearing DRVWY essentials

The Driveway auto shop owners will sell contemporary essentials fashion through DRVWY brand.

SAN JOSE, CALIFORNIA, UNITED STATES, February 2, 2021 /EINPresswire.com/ — The Driveway auto shop owners will sell contemporary essentials fashion through DRVWY brand

Jan. 28, 2021 SAN JOSE, Calif. — The four young Asian-American entrepreneurs who founded The Driveway Auto Repair Shop have always been obsessed with cars.

Childhood friends Michael Ly, Willie Chac, and Kevin Dang grew up living and breathing all things auto. CEO Dang spent countless hours playing racing games as a child. When he was 9, his father's untimely death from lung cancer led him to escape even more into his love of cars and racing.

The trio connected in junior high when they discovered a shared passion for cars and started tinkering with vehicles on their own driveways. Eventually, they grew to a team of four when they added friend and fellow car fanatic Eranthe Mitome.

The four friends established The Driveway in 2018 to build a different kind of aesthetic and performance auto repair shop with a focus on bringing a unique experience to their clients. Their minority-owned independent shop in San Jose sets itself apart by including a progressive lounging space allowing clients to relax and focus on their own work as they wait for their car service to be completed. Though they service all makes and models, they specialize primarily in Tesla and Porsche vehicles.

Now, the team is taking their unique auto brand a step further by launching a track-themed line of streetwear DRVWY. Mitome said adding a line of apparel and gear bridging the gap between car culture and streetwear was a no brainer.

"Our life is pretty much on raceways," she said, "so it only made sense to start creating our own lifestyle brand that encompasses the thrill, adrenaline, and confidence that we feel when we're on the track."

DRVWY includes a collection of basic essential apparel and other merchandise made for the drive, with subtle and monochromatic elements.

"We purposefully avoided loud and flashy designs because our consumers want to be confident, comfortable and stylish in our basic essentials," Mitome said. "DRVWY is a multifunctional lifestyle brand and it's an extension of us."

Learn more about The Driveway and the DRVWY streetwear collection at https://www.thedriveway.us. Follow the company on Facebook (@thedriveway.us) and Instagram (@thedriveway.us). View the company's Yelp page at https://www.yelp.com/biz/the-driveway-san-jose.

Eranthe Mitome
The Driveway
merch@thedriveway.us
Visit us on social media:
Facebook

View a video about The Driveway’s sixth generation Ford Mustang (S550)


Source: EIN Presswire

Forever Group launches Geotab UK Fleet Management services

Forever Group launches Geotab UK Fleet Management services as an extension of our expertise in business mobility solutions.

KIDDERMINSTER, WORCESTERSHIRE, UNITED KINGDOM, January 29, 2021 /EINPresswire.com/ — Forever Group is an established Telecommunications and IT specialist, with long-standing partnerships across the UK's leading business mobile networks. Additionally, as a Telefonica M2M partner and with numerous Cisco accreditations, we also provide secure connectivity and IoT solutions.

We are proud to be launching Geotab UK services as an authorised reseller. Geotab are the global market leader in Fleet Management and Fleet Telematics technology, with more than 2,000,000 vehicles deployed globally.

In addition to Fleet Tracking, Geotab captures rich Fleet Telematics data for vehicles and drivers to provide real operational insight in to your fleet. This includes driver risk analytics and coaching to help improve driver behaviours such as speeding, rapid acceleration/deceleration, and high RPM driving.

Further – as part of our ongoing efforts to promote energy-efficient technology – alongside renewable energy and EV charging solutions – we are particularly attracted to the level of Geotab electric vehicles support including Electric Vehicle Suitability Assessments.

Geotab supports a wide range of vehicles – including cars, vans, trucks, HGVs, EVs, and more – all on one cloud software platform. Our Geotab ProPlus plan even supports live location tracking every second, making it an ideal choice for organisations that require instant tracking such as emergency services.

Additionally, as a cyber security specialist we have been equally impressed with Geotab's focus on data security – with standard encryption, device obfuscation techniques, and optional integration with Cisco security access controls to keep valuable fleet data away from prying eyes.

Whether organisations are looking for simple business vehicle tracking solution with van trackers, or require a more comprehensive fleet tracking system with fleet telematics devices, then our fleet management software services can help them.

As an established wholesale telecommunications provider with our own billing platform, we look forward to bringing competitive Geotab pricing to UK organisations including the ability to bundle Geotab with other services – such as mobile SIM cards for driver mobile phones or tablets.

For more information on our Geotab solutions – or to learn about the other ways that we can support your field and fleet employees with modern technology – please contact us via phone or email.

Forever Group Marketing Department
Forever Group
+44 333 358 3808
sales@forever-group.co.uk
Visit us on social media:
Facebook
Twitter
LinkedIn


Source: EIN Presswire

Achieve Next Generation Automotive Connectivity with Amphenol RF's AUTOMATE Mini-FARKRA Series

Amphenol RF’s AUTOMATE® Mini-FAKRA connectors offer space saving, high-bandwidth alternative to traditional FAKRA connectors.

DANBURY, CONNECTICUT, UNITED STATES, January 29, 2021 /EINPresswire.com/ — Amphenol RF is proud to introduce the AUTOMATE Mini-FAKRA connector series, the latest in automotive interconnect technology. This series offers a space-conscious, high-performance interface which is critical to the next generation of vehicle applications. Supporting up to 20 Gbps data transmission, AUTOMATE connectors reduce installation requirements by up to 80% compared to previous FAKRA products.

The AUTOMATE connector series is designed with color coded housings to provide visual guidance during the assembly process. They are also mechanically keyed to prevent mis-mating of the connectors. The foolproof installation makes this connector ideal for automotive applications such as autonomous vehicles, advanced driver assistance systems (ADAS) and 360 degree surround view cameras.

AUTOMATE is currently available in the type A right angle PCB and cable mount configuration and features many of the same popular design elements as traditional FAKRA including push-on mating, which provides audible confirmation of the secure connection, and terminal position assurance (TPA). The TPA is a secondary locking mechanism located on the cable mount connector which provides additional security during the installation process and snaps into place when the connectors are properly mated.

The Type A connector series is fully compatible with existing mini-FAKRA connectors commonly used in automotive applications. Custom cable assemblies and IP rated sealed solutions are available by request.

Amphenol RF is a leading manufacturer of coaxial connectors for use in radio frequency, microwave, and data transmission system applications. Headquartered in Danbury, Connecticut, USA, Amphenol RF has global sales, marketing and manufacturing locations in North America, Asia and Europe. Standard products include RF connectors, coaxial adapters and RF cable assemblies. Custom engineered products include multi-port ganged interconnect, blind mate and hybrid mixed-signal solutions.

Lindsay Sperling
Amphenol RF
+1 2037962034
email us here
Visit us on social media:
Facebook
Twitter
LinkedIn

Introducing Amphenol RF’s AUTOMATE Type A Mini-FAKRA Connector


Source: EIN Presswire

California US Navy Veterans Lung Cancer Advocate Urges a Navy Veteran with Lung Cancer in California to Call the Lawyers at Karst von Oiste About Significant Compensation-if He Had Heavy Asbestos Exposure in the Navy

"We want a Navy Veteran with lung cancer-and who had exposure to asbestos in the service to get compensated-but most won't because they do not realize how significant their compensation might be.”

— California US Navy Veterans Lung Cancer Advocate

LOS ANGELES, CALIFORNIA, USA, January 29, 2021 /EINPresswire.com/ — The California US Navy Veterans Lung Cancer Advocate says, "If you are a Navy Veteran with lung cancer anywhere in California and decades ago you had heavy exposure to asbestos in the service please call the lawyers at the law firm of Karst von Oiste at 800-714-0303 to discuss compensation. Financial compensation for a person like this might exceed $100,000. Financial compensation for a Navy Veteran who has lung cancer and who prior to 1982 had heavy exposure to asbestos-depends on how, where, and when he was exposed to asbestos. Typically, a Navy Veteran like this was exposed on a navy ship, submarine or at a navy shipyard.

"We want a Navy Veteran with lung cancer-and who had exposure to asbestos in the service to get compensated-but most won't because they do not realize how significant their compensation might be. The $30 billion dollar-asbestos trust funds were set up for people like this. The typical Navy Veteran we assist is over 65 years old, and his asbestos exposure occurred in the 1950s, 1960s or 1970s. If the person we have described sounds like your husband or family member please call the lawyers at Karst von Oiste anytime at 800-714-0303. This is worth your time." www.karstvonoiste.com/

The California US Navy Veterans Lung Cancer Advocate’s free services are available to people with asbestos exposure lung cancer or mesothelioma in Los Angeles, San Pedro, San Diego, San Jose, San Francisco, Fresno, Irvine, Oakland, Long Beach, Anaheim, Bakersfield, Riverside, Sacramento, Stockton or anywhere in California. https://California.USNavyLungCancer.Com

High-risk work groups for exposure to asbestos in California include US Navy Veterans, workers at one of California’s more than 70 power plants, shipyard workers in San Diego, Long Beach, or San Francisco, oil refinery workers in Long Beach or Martinez, manufacturing workers, public utility workers plumbers, electricians, auto mechanics, machinists, or construction workers. Typically, the exposure to asbestos occurred in the 1950’s, 1960’s, 1970’s, or 1980’s. https://California.USNavyLungCancer.Com

According to the American Cancer Society for nonsmokers who have been exposed to asbestos in their workplace the risk of lung cancer is five times that of unexposed workers. https://www.cdc.gov/cancer/lung/statistics/index.htm.

The US Navy Veterans Lung Cancer Advocate says, “If your husband, dad, coworker or neighbor has just been diagnosed with lung cancer and you know they had significant exposure to asbestos in the navy, at a shipyard or while working at a factory, at power plant, public utility, or as a plumber, electrician welder, mechanic or any kind of skilled trades group in any state please have them call us anytime at 800-714-0303. Most people like this never get compensated-even though the asbestos trust funds were set up for them too. We are trying to change this sad fact.” https://USNavyLungCancer.Com

States with the highest incidence of lung cancer include Kentucky, West Virginia, Maine, Tennessee, Mississippi, Ohio, Indiana, Louisiana, Arkansas, Missouri, North Carolina, Rhode Island, Alabama, and Delaware. www.karstvonoiste.com/

For more information about asbestos exposure lung cancer and mesothelioma please visit the CDC’s website on these topics: https://www.atsdr.cdc.gov/asbestos/health_effects_asbestos.html.

Michael Thomas
California US Navy Veterans Lung Cancer Advocate
+1 800-714-0303
email us here


Source: EIN Presswire

Missouri Mesothelioma Victims Center Recommends Attorney Erik Karst of Karst von Oiste for a Navy Veteran with Mesothelioma in Missouri or Their Family to Ensure the Best Compensation Results Happen

"As attorney Erik Karst of Karst von Oiste is happy to discuss at 800-714-0303-it takes time to ensure his client recall as much as possible about their asbestos exposure-for better compensation.”

— Missouri Mesothelioma Victims Center

KANSAS CITY, MISSOURI, USA, January 29, 2021 /EINPresswire.com/ — The Missouri Mesothelioma Victims Center says, "We recommend, and we have endorsed attorney Erik Karst of the law firm of Karst von Oiste to ensure a Navy Veteran with mesothelioma in Missouri receives the best possible financial compensation results. In many instances-financial compensation for a Navy Veteran might exceed a million dollars. As attorney Erik Karst of the law firm of Karst von Oiste is always happy to explain-mesothelioma compensation for a Navy Veteran or person with mesothelioma depends on how, where and when they were exposed to asbestos. The more instances of asbestos exposure in many cases the better the compensation-as Erik Karst of Karst von Oiste is always happy to explain at 800-714-0303.

"We are advocates for Navy Veterans and people with mesothelioma and our top priority is that people like this receive the best possible compensation results. Most people with mesothelioma we have been honored to assist in the last 15 years had not one-but multiple exposures to asbestos in the navy or at work. Usually when we ask them-how were-you exposed to asbestos-they offer one or two time frames. After we ask about these exposures the person recalls more exposure. As attorney Erik Karst of Karst von Oiste is always happy to discuss anytime at 800-714-0303 it takes a little time to make sure his client recalls as much as possible about their asbestos exposure-because their compensation depends on this." www.karstvonoiste.com/

The Missouri Mesothelioma Victims Center proudly offers their free services to a person with mesothelioma in any community in Missouri including Kansas City, St. Louis, Independence, Columbia, Lee’s Summit, O’Fallon, St. Joseph or anywhere in Missouri. www.karstvonoiste.com/

For the best possible treatment options in Missouri the Missouri Mesothelioma Victims Center suggests the following healthcare facility:

*Barnes Jewish Hospital Saint Louis, Missouri: https://www.barnesjewish.org/cancer-center

High-risk work groups for exposure to asbestos in Missouri include Veterans of the US Navy, civilian workers at Whiteman Air Force base, power plant workers, factory workers, public utility workers, plumbers, welders, industrial workers, electricians, auto mechanics, machinists, and construction workers. Typically, the exposure to asbestos occurred in the 1950’s, 1960’s, 1970’s, or 1980’s. www.karstvonoiste.com/

The states with the highest incidence of mesothelioma include Pennsylvania, Massachusetts, Maine, New Jersey, West Virginia, Florida, Wyoming, Oregon, Louisiana, and Washington. However, mesothelioma and asbestos exposure lung cancer does happen in Missouri as the Missouri Mesothelioma Victims Center would like to explain anytime at 800-714-0303.

https:// Missouri.MesotheliomaVictimsCenter.Com

For more information about mesothelioma, please refer to the National Institutes of Health’s website related to this rare form of cancer: https://www.cancer.gov/types/mesothelioma.

Michael Thomas
Missouri Mesothelioma Victims Center
+1 800-714-0303
email us here


Source: EIN Presswire

Giant Rapid Prototyping Company, WayKen, Plans to Promote Their Custom CNC Machining Services

Custom CNC-feature image

Custom CNC-feature image

Custom CNC-2

Custom CNC-2

Custom CNC-3

Custom CNC-3

WayKen is proactively promoting its Custom CNC machining business around the globe Market, as well as providing custom CNC parts to meet strict standards.

“Our custom CNC machining services ensure that our customers receive a comprehensive solution-complex and precision parts, like optical parts, automotive parts, medical devices, etc ” Founder Raymond”

— Founder Raymond

SHENZHEN, GUANGDONG, CHINA, January 29, 2021 /EINPresswire.com/ — When it comes to WayKen, meeting customers’ design and manufacturing needs becomes an utmost priority. This reputable manufacturing company is committed to providing custom manufacturing solutions, CNC prototype to production, and flexible production process. Clients can avail themselves of vast varieties of machining and surface finishing techniques for their products. WayKen is here to satisfy different projects of auto parts manufacturing. Other services include rapid tooling, CNC machining, sheet metal stamping, anodizing, painting, electroplating, and powdering.

WayKen’s CNC machine shop carries a huge selection of automotive parts that meet customers’ automotive needs, ranging from one unit to more than 10,000 pieces. There are no production limitations or time constraints in meeting market demands. WayKen’s expertise also extends towards professional project management, advanced lean production, and technical expertise engineering. Their team of experts is available to see clients’ projects from design optimization suggestions to manufacturing process details, to achieve efficiency and effectiveness. With WayKen, car part rapid machining just got better.

Unveiling Custom CNC Automotive
WayKen is one of the leading manufacturing companies that produce automotive parts with custom CNC machining. Using the company’s services implies that:
• Automotive projects undergo design for manufacturability (DFM). Before production, delegated certified design engineers can identify design problems and offer cost-effective and reasonable design proposals encapsulating product design, materials, manufacturing process, and manufacturability.

• Provide clients with advanced custom machining. WayKen transcends the traditional machine configuration other CNC shops offer. The company is equipped with advanced 3-, 4-, and 5-axis CNC machining centers to deliver several types of precision CNC machining services, including turning, milling, EDM and wire EDM, surface grinding, and many more.

• When anyone thinks of one-stop finishing, WayKen comes to mind. The reason for this is the complete in-house finishing services customers enjoy from this company. They include polishing, sanding, blasting, painting, printing, and specialty surface treatment of anodizing, laser etching, electroplating, chemical finishing, chroming, and powder coating.

• WayKen is an ISO 9001 certified factory. Everything required to continuously improve and optimize in-house production processes is available. Inspection of projects rests on the professional-trained engineering team, who ensure compliance with the stringent quality specification.

WayKen Providing Custom CNC Parts to Meet Strict Specifications
Under custom CNC machining, Wayken produces both CNC metal parts and CNC plastic parts. For the former, the company takes into account the highest degree of precision possible for efficient precision machining. But that is not all; there is also support for metal machining services for a variety of materials, including magnesium, aluminum, titanium, steel, zinc, and stainless steel. When it comes to custom CNC plastic parts, WayKen offers more than 30 engineering-grade plastics, ranging from visual design models to functional prototypes. The company also specializes in complex surface CNC plastic milling and fast turnaround to deliver your plastic parts and prototypes. Here are some benefits to such services:
• Customization Based on Customer Needs & Values. WayKen is committed to strengthening production plan management, improving the production process, supplying chain collaborative optimization, and implementing cost control. The company continues to strive for improvement, excellence, and enhanced customer satisfaction.

• Competitive Shorter Lead Times & Lower Costs. Another factor worth noting is the provision of faster and more flexible order processing and delivery of products on clients’ schedules while supporting their entire development process. In the same vein, WayKen’s team of experts are here to troubleshoot possible process issues in full production.

• Innovative Service and Seasoned Professionals. WayKen is not one manufacturer to slack on offering its customers consistent quality control, from part to part and project to project. Here, each specialist pays attention to detail, addresses potential problems, researches new materials and processes, invests in automotive technology, and works toward building a sustainable team of professionals to constantly oversee rapid manufacturing.

From CNC prototypes to full production runs, WayKen is on standby to make them happen. The company ensures that customers get high quality, fast delivery, and competitive pricing. Whether it be high complexity machining or low-volume CNC machining, WayKen’s team provides the best services. It is worth stating that there is no minimum order on custom CNC parts.

Implementing One-On-One Collaboration for Better Manufacturing Results
With WayKen, customers have access to professional services from a technical sales team that pays attention to every detail required to make a project idea realizable. Furthermore, these warm and receptive professionals supply technical advice on any project and assist with issues concerning manufacturing, processing, DFM, and budgets.

About WayKen Rapid Manufacturing Industry
WayKen Rapid manufacturing industry is currently active in over 30 countries with over 200 customers worldwide. Their professional team is based in China and boasts of more than 60 employees and over 5000 projects. For more info, kindly visit www.AutoProtoWay.com.

Tony Gong
WayKen Rapid Manufactyuring Limited
+86 755 2373 1920
email us here
Visit us on social media:
Facebook
Twitter
LinkedIn

Custom Prototype Manufacturing Service


Source: EIN Presswire

One Hundred Feet and TOMAR Electronics. Inc Form Strategic Partnership to Offer Enhanced Safety Services

The two companies team to provide the ultimate product/software duo to reduce emergency response time and increase personal and public safety.

One Hundred Feet’s software-overlay allows us to finally extend EOS the final leg, from property entrance to the exact location of people in need.”

— Jason Shadle, National STROBECOM II Product Manager at TOMAR

UNITED STATES, January 28, 2021 /EINPresswire.com/ — On January 12th 2021, One Hundred Feet, an innovative geospatial mapping company, and TOMAR Electronics, Inc., a leading manufacturer of emergency warning products and optical preemption systems, joined forces to offer public safety officials access to a broader range of products and services. Both companies proudly work to increase safety for public service workers, while reducing emergency response time. The partnership will combine their efforts and grant TOMAR’s customers further access to innovative solutions that help them save lives and better protect communities.

TOMAR Electronics has produced cutting-edge emergency response technology for over 50 years and has established a reputation of delivering reliable, robust, safe products in the public safety industry. Its decision to partner with One Hundred Feet now furthers their available services by offering precise GIS mapping software. This software lays over a department’s current navigation system to reveal precise location data relevant to public safety, including apartment unit numbers, building and complex entrances, and stairwell locations to an accuracy of within 10ft.

"For over 50 years TOMAR has been providing solutions to protect people and property. Our Envelope of Safety (EOS) right-of-way enhancing solution gets first responders from the station, through traffic, and on the property of the crisis as safely and quickly as possible." Says Jason Shadle, National STROBECOM II Product Manager at TOMAR. "One Hundred Feet’s software-overlay allows us to finally extend EOS the final leg, from property entrance to the exact location of people in need.”

Tamara Coffey, Director of the Public Safety Division for One Hundred Feet stated, “We are happy to kick off this partnership and jointly continue both organizations' passion of providing quality products and top-of-the-line services. Emphasizing on the importance of reducing response time, arriving at the accurate location quickly and safely could ultimately help save lives.”

About One Hundred Feet Inc.
One Hundred Feet Inc. is a geospatial mapping company that creates data where it previously didn’t exist. This data provides clear-cut navigation for the last 500ft of a journey to complex destinations. For additional information, please visit www.beans.ai.

About TOMAR Electronics
TOMAR Electronics is a leading manufacturer of high quality emergency warning products and optical preemption systems. Located in Gilbert, AZ, TOMAR has designed and manufactured highly reliable and efficient LED and strobe light systems for more than 50 years. For more information, please visit www.TOMAR.com.

Akash Agarwal
One Hundred Feet, Inc.
+1 4156042759
email us here


Source: EIN Presswire